Synergistic Research Excite SX – Phono SX Interconnects Synergistic Research

Excite SX RCA interconnects start with two 5th Generation Tricon Silver Matrix geometries running in parallel. We then add two hand-made Air String Geometries featuring pure 6-9’s silver conductors in an Air Dialectric. For XLR, we run four Air String geometries for a genuinely balanced XLR cable. We then apply the same High-Frequency Long Duration Conditioning Process originally developed for our state-of-the-art SRX cable loom. The same conditioning process that elevates our Purple Fuses making it the world’s highest performance fuse for audio applications. To lower Excite SX’s noise floor and to improve musicality, we add new Carbon Fibre UEF Tuning discs internally at strategic points along the cable shield and inside the connectors for increased resolution without harshness or loss of high-frequency air and extension. Excite SX is also equipped with grounding wires that allow you to connect the shields of the cables to an outboard ground point and are supplied as standard. The ability to separate the cables shields from your components means noise picked up along the shield is bypassed from your system’s components to house ground for a lower noise floor and improved holography. And for a lower noise floor still, ground your cable’s shields to an optional Synergistic Research Ground Block or Active Ground Block. Lastly, we make voicing Excite SX to your system easy with an included Galileo SX Gold UEF tuning bullet. Simply listen to the cable with and without the Galileo SX Gold Tuning Bullet and pick the option that makes music in your system.

Quantum Tunneling

SRX Long Duration High Voltage Conditioning.

After perfecting the most natural-sounding and holographic cables in our history, we set out to take them further with a new high voltage conditioning process that applies a sweeping frequency plot for an extended duration. We experimented with dozens of frequencies in different combinations over a prolonged time period before landing on just the right mix. We even built a new Tesla Coil to handle the excess heat generated during long conditioning sessions. Once finalized, the SRX conditioning process created holographic realism and timbrel accuracy far beyond our previous Tesla Coil conditioning protocol. 

Atmosphere EXCITE SX Interconnect Specifications:

2 each Tricon 4th Gen cable geometries:

• Silver Matrix: Mono crystal conductors with a separate ground conductor from shield
• Dielectric: Teflon
• Shielding: UEF Ground Plane Technology
• Geometry: 3 channel single ended / 8 channel balanced
• Listening tests performed for signal direction before build

2 each Silver Air String Geometries:

• Silver Air Strings: 99.9999% pure mono crystal silver conductor
• 4 separate conductors RCA / 8 separate conductors XLR
• Dielectric: Air (sealed)
• Shielding: UEF Ground Plane Technology
• UEF Level 1 OTSP Field Filter (outside the signal path)
• Hand crafted in our California factory

Geometry Count:

Each Pair of Atmosphere Excite SX Interconnects are actually 2 separate runs of Tricon 4th Gen cables RCA -or- 4 separate runs Tricon 4th Gen cables XLR plus 4 Sealed Air Dielectric Silver cables RCA -or- 8 Sealed Air Dielectric Silver cables XLR plus one Level 1 OTSP UEF Field Filter for RCA or XLR interconnects.

RCA and XLR Connectors:

• Silver Teflon SR 20 RCA -or- Neutrik NC3FX-BAG, NC3MX-BAG XLR connectors

2 each Red Tuning Module:

• Optional voicing for incresed warmth, liquidity

Build Notes:

• 38 (RCA) 50 (XLR) point-to-point hand soldered connections
• Atmosphere Level 3 UEF Matrix Treatment: 2 different UEF coatings with Graphene are applied to connectors and cabling and ground significantly reducing the noise floor and allowing a purer signal to transfer with less grain providing more warmth and detail. The conductors and ground plane also benefit from dampening effect that UEF provides.
• 1 Termination for Atmosphere Tuning Module (Red)
• Ground Plane Termination
• Silver Solder: 4%
• Hand build time: 4 hours
• Quantum Tunneling: Connections and cabling are treated with 1,000,000 volts of electricity at specific frequencies and pulse modulations, creating a canal in the conductor material and contact points at the molecular level that allows electrons to flow more freely
• Secondary UEF Blue Treatment originally developed for SR Blue Fuses
• 5 day Burn In: 2-step process
• Hand crafted in our California factory

SR Ground Block (optional):

Atmosphere EXCITE SX interconnects have shields that can be grounded direct to earth with supplied ground cables bypassing your component’s power supplies for a lower system noise floor.

• To improve performance further still use an optional SR Ground Block with its UEF Ground Filter -or- Active Ground Block to elevate overall system performance; not only can you star ground the shields on Atmosphere EXCITE SX and EUPHORIA SX interconnects and speaker cables to either the passive or ACTIVE Ground Block, but you can also ground all of your system’s components for a dramatic lowering of your system’s noise floor for greater detail, clarity, and musicality.