Sale!

browsecranborneaudion22hn8bundlecranborneaudioandmorevisitourstoretodayandtakeadvantageofamazingsavings0.jpg

browsecranborneaudion22hn8bundlecranborneaudioandmorevisitourstoretodayandtakeadvantageofamazingsavings1.jpg

Cranborne Audio N22H + N8 Bundle Cranborne Audio

Name: Browse Cranborne Audio N22H + N8 Bundle Cranborne Audio, and more. Visit our store today and take advantage of amazing savings
SKU: mode_8230570230010
Price: 91.60 USD
Availability: InStock

$ 91,60

Title

Clear

SKU: mode_8230570230010 Category: Headphone Distribution Tags: Cranborne Audio, Headphone Amps and Distribution, New Gear

N22H is a reference-grade headphone amplifier with advanced C.A.S.T. cable management, battery power, and switchable power modes.

Deployable Headphone Amps via Cat 5

N22H is a headphone amp that can be deployed exactly where it is needed – right beside the musician.

Using our C.A.S.T. system, N22H can be connected on the end of a 100m (330ft) shielded Cat 5e, Cat 6, and Cat 7 cable and deliver a headphone mix directly to the musician during tracking.

Standalone Reference-Quality Amplification

Based on the same custom design found in the renowned 500R8 interface, N22H’s headphone amplifier achieves a flat Frequency Response from 0.8Hz to above 250kHz and ultra-low distortion (0.0009% THD+N, 100 kOhm load) allowing it to power headphones with clean, transparent power during critical listening, mixing, and mastering.

First and foremost, N22H is a standalone, reference-grade headphone amplifier. Simply connect the line outputs of your audio interface, guitar pedalboard, mixer, keyboard, or outboard hardware directly into to N22H’s inputs, set the ‘Source’ switch on N22H to ‘Inputs’ and you are ready to use N22H for all of your heapdhone monitoring needs!

Using N22H’s headphone amp instead of those built-in to devices upgrades the headphone monitoring quality of your existing setup and allows you to benefit from more power and higher clean volume with a wider range of headphones.

C.A.S.T. uses a shielded Cat 5e, Cat 6, and Cat 7 cable instead of 4 XLRs to not only reduce cable spaghetti in your studio but also distribute audio around studios or stages using affordable, readily available network cabling whilst achieving the highest sonic results due to their strict design standards.

Each C.A.S.T. connection on a Cranborne Audio product features unique optimisation to ensure that the maximum signal integrity is transmitted over shielded Cat 5, Cat 6, and Cat 7 cables for distances of up to 100m(330ft) without high-end roll-off and with very low-crosstalk.

Standalone Cat 5 Snake

Replace cumbersome and expensive analogue multicore systems by using one N22 and a N22H to send and receive balanced analogue audio between two locations. Connect N22 to your current audio interface and send a monitor mix directly to the N22H in the vocal booth using a single shielded Cat 5e, Cat 6, or Cat 7 cable cable.

Phantom Power With 500R8, 500ADAT, Camden EC2

If you’re using a 500R8, 500ADAT, or Camden EC2, simply connect the C.A.S.T. inputs of the device to the C.A.S.T. output of N22, engage 48v on your preamps, and you’re ready to record!

Key Features

Two balanced combi jack inputs
Two balanced XLR and 1/4” jack outputs
Reference-quality headphone amplifier
- THD+N: <0.0009% (-100.4dB) @ +6dBu, 1kHz, A-weighted, 100 kOhm load
- Output Wattage (1kHz): 252mW x 2 @ 600 ohms, 502mW x 2 @ 220 ohms, 950mW x 2 @ 100 ohms, 470mW x 2 @ 32 ohms
- Frequency Response: 1dB, <0.8Hz to >200kHz
Switchable High and Low Power Modes
- High Power optimised for maximum power and performance for high-impedance, over-ear, and open back mixing/mastering headphones
- Low Power optimised for maximum battery life for low-impedance, in-ears and closed back tracking headphones
9V Battery compartment
- Up to ~10 hours battery life (Low Power Mode)
- Up to ~2 hours Battery life (High Power Mode)
9V DC Power Inlet
- Includes a 9V DC (centre negative) power supply
- Can be powered with any 3rd party 9v DC (centre negative) guitar pedal power supply (1000mA supply recommended)
C.A.S.T IN RRTT Port
- For connecting to the C.A.S.T. Output of N22 or other C.A.S.T. enabled devices
C.A.S.T OUT TTRR Port
- For connecting to the C.A.S.T. Input of 500R8, 500ADAT or other C.A.S.T. enabled devices
Cat5 snake connectivity with N22 or second N22H
Compatible with any shielded Cat 5e/Cat 6/Cat 7 cable with distances up to 100m/330ft
Improved crosstalk performance with high-performance Cat 6 and Cat 7 (recommended)
Ruggedised metal enclosure
Fixing holes for permanent installation
Cable-tie holes for cable management
Non-slip rubber feet
⅜” mic stand thread mount on bottom

Cranborne Audio N8

N8 is an advanced audio distribution hub that uses Cranborne Audio’s C.A.S.T. system to transform network cable (Cat 5e, Cat 6, or Cat 7) into 4-channel analogue snakes.

Audio Over Cat 5 Made Easy

A single Cat 5 cable using C.A.S.T. can replace 4 XLR cables – providing better cable management, consistent sound quality, and easier deployment during mobile recording.

Using N8 and C.A.S.T., you can use standard network cables to distribute IO, headphone amps. mic preamps, and more around your studio with plug-and-play simplicity.

C.A.S.T. Distribution Hub

Featuring Input and Output connectors on DB25, N8 converts 8 analogue inputs and 8 analogue outputs to Cranborne Audio’s proprietary C.A.S.T. system.

With 4 dedicated C.A.S.T. ports, N8 allows up to 4 Cranborne Audio breakout boxes to be connected at once for 16 channels of audio routing with any audio interface, mixer, or audio installation.

Key Features

C.A.S.T. Distribution Hub and Audio Over Cat 5 System
Completely passive operation
Fully-balanced, high-quality audio paths
8 Inputs and 8 outputs over DB25 (Tascam wiring) (sold separately)
C.A.S.T. IN A, B, C, and D ports on RH45 with 2 dedicated Input and output paths each
Compatible with any shielded Cat 5e/Cat 6/Cat 7 cable with distances up to 100m/330ft
Improved crosstalk performance with high-performance Cat 6 and Cat 7 (recommended)
Ruggedised metal enclosure
Compatible with all Cranborne Audio C.A.S.T.-enabled devices including N22, N22H, Camden EC1, and Camden EC2
Fully-support of 48v phantom power
Rack-mountable with optional Half Rack Kit (OBDRK001)

Title	Default

Prompt Delivery and Professional Packaging

Our long-standing partnership with UPS FedEx DHL and other global carriers lets us offer a range of shipping services. Our warehouse staff is extremely skilled and will package your items according to our precise and exact specifications. Your goods will undergo an extensive inspection and be safely packaged prior to being sent out. Each day, we ship to thousands of customers in many countries. The fact that we are committed to becoming the biggest online retailer in the World is clear. These warehouses are in Europe in the same way as they are in USA.

Note: Orders that include more than one item are assigned a processing period depending on the item.

Before shipping, we will inspect thoroughly the items you have ordered. Most orders are shipped within 48 hours. Expected delivery time is between 3-7 days.

Returns

Stock is dynamic. It's not entirely managed by us since we are involved with multiple entities, including the factory and the storage. The actual stock can change at any moment. It is possible that your order may be out of stock once the order has been placed.

Our policy lasts for 30 days. We cannot exchange or refund your order if it has been 30 days from the date of purchase.

For your item to be returned it must be in its original packaging, unopened and in the condition you received it. The item must be in its original packaging.

Cranborne Audio N22H + N8 Bundle Cranborne Audio